SEARCH
 
Products Support Services Products Support Services Products
ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com
MULTIROTORS & UAVS BALLOONS & BLIMPS GLIDERS & PLANES GROUND STATIONS ROBOTS & UGVS RECREATIONAL BOATS & ROVS LIMITED SUPPLY ITEMS

 

Multirotor Small Unmanned Aircraft Systems


 

3X Pro V3 Gimbal (for Canon 5D/7D/Panasonic AF100)
3X Pro HD Gimbal
(for Red Epic, Canon 300)

line500

The 3X Pro gimbal models are built for professional aerial imaging use with two models to chose from:

  3X Pro V3
A three axis camera gimbal capable of carrying cameras as large as Canon 5D/7D or even the Panasonic AF100.

3X Pro
HD
A three axis camera gimbal capable of carrying larger camera - fits Red Epic and Canon C300 size cameras.

line5003X Pro v3 Features include:

  3X Pro V3 is rigid and strong due to it's all aluminum construction. It is a 3 axis camera mount system, where pan, tilt, and roll axis are controllable via a standard RC airplane/helicopter controller (sold separately). The 3X Pro V3 uses RC servos (included) which are controlled via pulse width modulation (pwm) with a sweep of 900us-2100us. The servos are 360 degree modified for continuous rotation.

The roll arch rides inside of eight precision flange bearings. There is zero play or slop in the roll axis. Tilt axis is contained within the roll axis allowing for electronic stabilization. The 3X Pro v3 is most commonly used with RC helicopters with mounting solutions available(sold separately) for Trex 600E & 700E, 700DFC, 800DFC, Logo 600, Logo 600 Carbon, Gaui X7, and Maxi Joker 3. Please contact us for more information.

The 3X Pro v3 is fabricated from CNC machined and anodized aluminum. It is able to fit cameras such as Canon 5D/7D, Sony FS100 and similar sized cameras.  An optional camera tray upgrade is available (sold separately) and recommended for cameras over 3lb (1.4kg) weight.

The pan & tilt axis are gear driven with a 6:1 gear ratio for smooth motion. Roll axis is belt driven with 7:1 gear ratio. Adjustable gear mesh on pan/tilt allows for slop free, low backlash setting. Gear pitch is 48. Servo pinion gear 20 tooth, main gear 120 tooth. 1/4″ gear face thickness offers durability. The roll axis utilizes an MXL series toothed timing belt.  Servo to roll axis reduction is 7:1.  Smooth, slop free, and precise motion is easily achievable. Roll pulley axle is double bearing supported.

Standard adjustable camera tray is capable of accepting most DSLR cameras similar in size to Canon 5D, Nikon D800.  Other cameras such as Red Epic, Sony FS100, and Panasonic AF100 also fit but it's recommended to use the upgraded Carbon/Aluminum Tube Camera Tray (below). Standard tray is adjustable by 20mm in vertical dimension to allow for camera center of mass to align with tilt axis.

All of the parts of the 3X Pro are precision machined in the USA by certified aerospace industry machine shop facilities. Tolerances on parts are very tight allowing for strong and light structures that stand the test of time. Aluminum parts on the 3X Pro are anodized to protect against corrosion increase surface hardness and offer visual appeal. The Heavy Duty Pan Shaft is now included allowing 150% greater bearing surface area and is 220% more rigid. This keeps the 3X Pro v3and the 3X Pro HD from flexing at the pan axis when a heavy camera/lens is used.  Also the shaft is hollow instead of solid as the standard shaft is.  This allows wires to be run through the shaft from the helicopter without the worry of tangling them when panning the gimbal.  A benefit when running power or video signal wires from the helicopter to the camera.

line5003X Pro HD: The new 3X Pro HD is the latest in Photoship One's line of 3X gimbal series.
3X Pro HD Features include:

  • Aluminum construction (not G10 composite)
• Heavy duty 3/8" Stainless steel pan shaft
• Heavy duty fully adjustable carbon fiber tilt tray (20% larger than 3X Pro V2)
Easily fits Red Epic and Canon C300 size cameras.

The X3 Pro HD Gimbal is also an ideal solution for cable cams, telescopic masts, 900+ size helicopters, large scale blimps, and balloons.

 

NOTE:
By selecting "BUY NOW" you confirm you have read, understand, and agree to all our Terms & Conditions. International shoppers: Please request  shipping quote.

Contact us for rmore information




See: FAA / COA, UAS Drone Operation / Authorization Guide
REMOTEPILOT NETWORK
Home
Company
Contact Us
Products
Support
Multirotors & UAV System
Balloons & Blimps
Paragliders & Planes
Recreational Products
Boats & ROV Systems
Robotics & UGV Systems
Ground Stations
Limited Supply Items
Terms & Privacy
Gift Cards