SEARCH
 
Products SupportServicesProducts SupportServicesProducts
ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com ReallyCoolToys.com
MULTIROTORS & UAVS BALLOONS & BLIMPS GLIDERS & PLANES GROUND STATIONS ROBOTS & UGVS RECREATIONAL BOATS & ROVS LIMITED SUPPLY ITEMS

 

Multirotor Small Unmanned Aircraft Systems


 

BMP PIC Video Feed (RCT-PICVF): Finally, a DIY video feed kit for your inspire 1 (V1, V2, or Pro) that doesn't break the bank or void manufacturer warranty. The all inclusive wireless PIC (Pilot in Command) Video Feed DIY Kit offered here is a Do It Yourself, all inclusive, 5.8Ghz wireless video Transmitter and Camera Lens, mounted to the rear of the aircraft, rendering stationary video feed of aircraft's nose heading and stabilized camera to PIC to an independent LCD receiver (sold separately).



BMP-PICVF DIY Kit 01 includes:
 

1 x PICVF Mount (for Inspire 1)
1 x PICVF Lens Mount
3 x Velcro Straps for Mount
2 x Velcro Straps for Aircraft
1 x 3M Adhesive (2" strip)
Does not include Spacer or GPS mount adapters, or any electronics. Aircraft sold separately.
 



BMP-PICVF DIY Kit 02 includes:   1 x PICVF Mount (for Inspire 1)
1 x PICVF Lens Mount
1 x PICVF Spacer 
1 x PICVF GPS Adapter/Mount
3 x Velcro Straps for Mount
2 x Velcro Straps for Aircraft
1 x 3M Adhesive (2" strip)
Does not include any electronics. Aircraft sold separately.
 



BMP-PICVF DIY Kit 03 includes:   1 x PICVF Mount (for Inspire 1)
1 x 3.6mm high resolution Camera/Lens
1 x TS-351 AV Transmitter
1 x PICVF Lens Mount
1 x PICVF Spacer 
1 x PICVF GPS Adapter/Mount
3 x Velcro Straps for Mount
2 x Velcro Straps for Aircraft
1 x 3M Adhesive (2" strip)
Does not include::  LCD/Receiver or Battery (S2/1000mah). Aircraft sold separately.
 



Specifications:
  H 120mm (4.72") x W 57mm (2.24") x D 43mm (1.69")
    Weight with 2S 1000Mah battery: 147g
Weight with no battery: 99g
Weight Mount only: 29g with Lens mount: 35g w/ith all modules: 50g
    Material: 3D Printed PLA, biodegradable thermoplastic. Note: PLA surface may show enherent imperfections not affecting performance.
    PIC VF Camera Lens/GPS/OSD mount installation and options video
PIC VF - Pilot in Command Video Feed flight example video
BMP PICVF DIY Install Guide PDF file

GENERAL GUIDE/TIPS:
- Modular adapters included may be mounted dry or using small dab of Goop (not included) adhesive.
- Enclosed 3M double sided adhesive tape maybe used (not required) to reduce vibration to the IM
- Suggested battery: Lipo 2S 1000mah or 3S 450mah battery. Charge battery fully.
- A fully charged battery will assure longest duration and most reliable feed.
- Use of Clover-style antenna (not included) or signal extenders will extend range of AV transmission.
- Double sided tape is provided for fully securing Lens into Lens Mount.
- Apply a dab of Goop to secure camera lens, spacer(s), and modules into place.
- Make sure AV TX antenna and components are cleared away from aircraft blades and moving parts.
- Check and make sure every component is tightly secured in place before each take off.
- Use goop to set position and to secure antenna. - When installing straps onto aircraft make sure no wires, cables, or mechanical parts are restricted.
- Use Quick Guide Instruction Sheet for installation. Do not over-stretch or over tighten Velcro straps.


A WORD ABOUT RANGE & QUALITY OF VIDEO:
The TS-351 AV transmitter/antenna is a 200mw transmitter ideal for standard LOS range of use. Similar to other AV/FPV products, quality of link and range are affected significantly by terrain, external interference, weather/environment, choice of antenna, ground station receiver (not included) , receiver antenna (not included), etc. Considering those variables the reported range is from 2.2 miles to under 100 feet. Test and safely manage each flight by remaining in range for a dependable link each time you fly. Suggested choice of transmitter antenna upgrades: cloverleaf, pinwheel, etc. Suggested choice of receiver (not included) antennas: cloverleaf, or circular wireless helical, other high power FPV receiver/antennas and tracking systems.






NOTE:
By selecting "BUY NOW" you confirm you have read, understand, and agree to all our Terms & Conditions. International shoppers: Please request  shipping quote. Items ship out in 2-10 business days.


BMP PICVF DIY Kit 01
Price: $39




BMP PICVF DIY Kit 02
Price: $59




BMP PICVF DIY Kit 03
Price: $99





       
REMOTEPILOT NETWORK
Home
Company
Contact Us
Products
Support
Multirotors & UAV System
Balloons & Blimps
Paragliders & Planes
Recreational Products
Boats & ROV Systems
Robotics & UGV Systems
Ground Stations
Limited Supply Items
Terms & Privacy
Gift Cards