|
|
|
Radio Control Gas Powered Paraglider With
Eyecam!
The
RC Powered Paraglider is a slow and very
stable, a perfect park flyer and aerial
imaging platform. This aircraft will
almost fly and land itself. Perfect for
teaching yourself to fly at speeds up to
18MPH.
Made
of commercial aircraft aluminum, plywood,
and spruce material this RC Paraglider is
an ideal platform for aerial imaging. Just
strap an Eyecam (sold separately) wireless
video camera to the aircraft and capture
quality video at up to 1000ft line of
sight.
The
Canopy (Parachute) is made of durable
Ripstop nylon, kevlar lines 52"x22", 14
cells, full ventilation, pre-strung,
assorted colors With the included .15 size
nitro motor (15% rc aircraft nitro/fuel
mix - available at your local hobby shop),
this aircraft is capable of taking off in
less than 20 feet of paved, dirt, or short
grass runaway. It is also often hand
lunched by more experienced pilots. The
included transmitter will allow complete
throttle and ailron control. Premix
functions will allow the use of ELEVONs
when more precision control is
required.
The
Nitro Paraglider can be flown from a
backyard or park by an experienced pilot
and in winds of up to 10 MPH. However, in
general the unit will fly best in low wind
conditions. For the less experienced pilot
we recommend one acre of unobstructed
space, mild winds of 1 to 5MPH, and
additional adult supervision and
assistance.
The
Canopy is very durable and brightly
colored. If soiled, sponge clean with
water and a mild soap. Any fuel spray
should be cleaned from the chute in the
same manner before storage. The
Instruction manual will take you step by
step through the assembly and set up
procedure.
|
|
|
|
|
|
Kit
includes everything needed to build and
fly: 1:8 Nitro Paraglider with radio,
engine. Does not include Eyecam wireless
video system (sold separately) or
fuel.
|
|
|
|
RC
nitro powered paraglider Ready to
Fly
Requires
assembly
iIdeal
system for aerial imaging (wireless camera
sold
separately)
|
|
|
|
Dimensions:
Width: 20" , Height: 15", Length: 20" .
Engine: 15 Size. Muffler: pusher or pitts
style. Servos: 3 mini servos. Radio
System: 2 channel TX/RX. Propeller
size/type: 8-4 pusher, Fuel tank: 4 oz.
Wheels: 2-2" 1-1 3/4" w/collars. Flight
time: Approximately 45 minutes. MPH:
Approximately 0 - 18. Construction
material: Aircraft aluminum and plywood.
Colored Picture Builders Manual. Canopy:
Ripstop nylon, kevlar lines 52"x22", 14
cells, full ventilation, pre-strung,
assorted colors.
Standard RC hobby regulations: Flight
altitude limited to 400 ft.
Note: Manufacturer reserves the right to
make changes and improvements to product
line any time without prior
notice.
|
|
