|
|
|
Small Wing - Lots of
punch!
The
30" wing span Mini Portable Flying Wing
(miniPFW30) is the baby brother of the
larger 43" Portable Flying Wing (PFW43).
It's smaller, lighter and more
maneuverable for indoor or outdoor
flight.
Control
is mixed pitch and roll via true wing
warping without any control
surfaces.
This
indoor or light wind park flyer is very
efficient and performs well with just the
little GWS brand LPS motor and a pair of
small LiPoly
cells.
It
is stable in flight yet offers exceptional
controllability with its exclusive
Warperon (TM) wing shaping system.
The miniPFW30 is a very stable wing yet
due to its small size is still highly
maneuverable.
The
slow speed flight characteristics are very
solid since the controls add more washout
at high angles of attack just when you
need it most. It is also very comfortable
in breezy conditions due to the
outstanding control
response.
The
wing holds its airfoil shape at all times
from the exclusive pre-tensioned wing bows
without the use of ribs. The washout is
varied for complete control by directly
twisting the wing tips.
The mini Portable Flying Wing RC glider
Base Kit does not include motor, servos,
radio RX, or TX or any electronics. This
Kit is intended for those who already have
their own electronics and radio gear.
|
|
|
|
|
|
MINI
PFW 30" RC Portable Flying Wing Base
Kit
Requires (not included): 3 channel radio
(TX/RX) with mixing, 2) HS-55 or
equivalent servos, micro receiver, and GWS
LPS,IPS, or CD-ROM motor system. BLANK
|
|
|
|
If
you can handle the assembly operation
pictured above, you can build this
kit.
No
special tools or skills are needed to
build, just some thin CA and a couple easy
evenings to
complete.
Easy
build kit with premade sail, all
tubes/rods cut and comprehensive owners
manual. BLANK
|
|
|
|
Span
= 30 inches
Area = 246 square inches (1.7 square
feet)
Length = 14
inches,
MAC
= 8.5 inches
AR =
3.5:1,
RTF
Weight = 4 to 6 oz
Wing loading = 2.5 to 3.5 oz/sq ft
Suggested gear (not
included):
4
channel micro receiver (GWS R4P or
better)
ESC
- GWS ICS-50 or Castle Creations Pixie 7
for brushed
motors
Castle
Creations Phoenix 10 for
brushless
Servos
- Hitec HS-55s or equivalent (not
included)
mixed
as
elevons
Requires
3 channel radio with delta or elevon
mixing preferably with
programmability
An
inexpensive Hitec Focus III or Neon works
just fine!)
Note: Manufacturer reserves the right to
make changes and improvements to product
line any time without prior notice.
|
|
|
|
|
Call for pricing and availability
|
Call for pricing and availability
|
|
|
|
|
|
|
|
