|
|
|
The Traxster II Robot Kit is new and
improved! We refined the design of our
very popular Traxster to be MUCH easier to
assemble, have a more durable coating, and
feature more useful holes to allow you to
bolt on our Push Button I/O Board, I2C
Line Following Sensor, Bluetooth/XBee
Antenna, and more!
The
Traxster Robot Kit was designed to be used
as an indoor educational robotics kit.
This readymade platform allows more time
for enthusiasts to develop intelligent
software (such as vision recognition or
localization and mapping).
Easy Robot Control using RoboRealm, .NET,
or Robotics
Studio:
The
Serializer WL Robot Controller provides a
ready-to-use solution to interface the
Microsoft™ .NET framework or
Microsoft™ Robotics Studio to common
robotic hardware.
Never before has it been this easy to
interface DC motors, servos, analog
sensors, single and quadrature encoders,
switches/relays, and other devices to the
.NET framework and/or Robotics Studio.
The all new Serializer WL™ has been
designed to allow customers the use of
five different serial interfaces (four are
interchangeable). The pluggable interface
modules include RS-232, USB, Bluetooth, or
XBee/XBee Pro. The TTL serial port is
built into the base Serializer board and
BlueTooth interface included in our all
inclusive kits.
Aluminum & Stainless
Steel!
The
Traxster features a very rugged anodized
aluminum chassis, driven by two DC gear
head motors, running on a set of ABS
injection molded tracks. All hardware is
either aluminum or stainless steel.The
Traxster can easily maneuver through
carpet and other types of flooring, as
well as traverse over small obstacles. The
Traxster's skid-steer drive tracks enables
it to spin about it's
center.
Start with all the essential modules you
need to learn and extend your
capabilities. All you have to do is to
download Free resources including .NET
framwork, Microsoft Robotic Studio, or
RoboRealm's Vision app with RoboRealm's
Traxster module, or any other applicable
solution you prefer - and you are set to
GO!
FREE
VISION & Traxster Control
Module!
The
guys at RoboRealm
have a really cool vision and drive
module, that will allow joystick control
of Traxster drive system and I/O
maniulation (no programming required) for
FREE! They have developed a module
specifically for controlling the
Traxster/Serializer
via USB joystick/game controller. Be sure
to check this
out!
Cell
phone, PDA, PC
Control!
The
Serializer WL can be controlled by any
device featuring a complimentary serial
device on the other end (e.g.
RS232-to-RS232, USB-to-USB,
Bluetooth-to-Bluetooth, XBee-to-XBee).
This could be a Personal Computer, a PDA,
a Cell Phone, a PC104 board, a Single
Board Computer, or a
microcontroller.
|
|
|
|
|
|
Traxster
II Chassis, Tracks, and Hardware
Serializer WL Controller Board
USB module
Bluetooth Module and BT Antenna
Two Quadrature
Motors
Pan/Tilt
Turret and
Servos
Sharp
IR Panner
3
Sharp GP2D12 Infrared Sensors & Cables
Camera,
other hardware, modules, and accessories
not included.
|
|
|
|
The
Traxster Robot II Chassis. The Traxster II
Robot Kit was designed to be used as an
indoor educational robotics kit. This
readymade platform allows more time for
enthusiasts to develop intelligent
software (such as vision recognition or
localization and mapping). Easy Robot
Control using RoboRealm, .NET, or Robotics
Studio:
The
Serializer WL Robot Controller provides a
ready-to-use solution to interface the
Microsoft™ .NET framework or
Microsoft™ Robotics Studio to common
robotic
hardware.
Main
Features
*
Rugged, Lightweight, Agressive
Design
*
Powder Coated Three-Toned (orange, gray,
black)
* Aluminum Components (chassis, belly pan,
drive
disks)
*
DC Gearhead
Motors
*
Quadrature Wheel Encoders, wire leads, and
0.100"
headers
*
Predrilled holes for Servo (for Sharp IR
Panner or CMUcam2/2+
Turret)
*
Predrilled holes for I2C Line Following
Sensor
*
Predrilled holes for Push Button I/O, LED,
Buzzer
Board
*
Predrilled holes for Bluetooth/XBee
Antenna
*
Predrilled holes for
Serializer
*
Predrilled holes for 5V Switching Voltage
Regulator
*
Predrilled holes for dual switches/wiring
harness, and wire
routing
*
Predrilled holes for Sharp IR Sensor Mount
hole in top/front of
chassis
*
Rear horizontal slots for mounting
additiona
accessories
*
Fully enclosed chassis (removable belly
ban)
*
Carries two 9.6V batteries underneath the
chassis with easy access.
|
|
|
|
Base
Kit
Dimensions
*
Length: 9 inches (229
mm)
*
Width: 8 inches (203
mm)
*
Height: 3 inches (76
mm)
*
Weight: 2.0 lbs. (32
ounces)
*
Ground Clearance: .75 inches (19
mm)
Base
Kit with IR
Panner
*
Length: 9 inches (229
mm)
*
Width: 8 inches (203
mm)
*
Height: 4 inches (102
mm)
*
Weight: 2.25 lbs. (36 ounces, including
Serializer)
*
Ground Clearance: .75 inches (19
mm)
Base
Kit with CMUcam2/2+
Turret
*
Length: 9 inches (229
mm)
*
Width: 8 inches (203
mm)
*
Height: 7.5 inches (191
mm)
*
Weight: 2.9 lbs. (46 ounces, including
Serializer)
*
Ground Clearance: .75 inches (19
mm)
Note:
Weights do not include batteries: Note:
Manufacturer reserves the right to make
changes and improvements to product line
any time without prior
notice.
|
|
|
|
|
$549.00
|
$639.00
|
|
|
|
|
|
|
|
